ppgi white color code 9016 prepainted galvanized steel coil 0.4mm
Overview
|
|
|
|
|
|
|
|
|
| Product | PPGI steel plate |
| Material | DX51D, SGCC,Q195, Q215,Q235, Q235B, Q215B, |
| Standard | JIS G3002 GB/T251B |
| Length | According to requirement |
| Thickness | 0.15mm-3mm |
| Width | 1000mm-1500mm |
| Zinc coating | 40-275g/m2 |
| Surface | Regular, small, big or zero spangle |
| Chromate, fingerprint resistant treatment, slight oiled or non-oiled, dry | |
| Coil ID | 508mm-610mm |
| Material | Hot rolled cold rolled |
| Port | Tianjin port or Designated port |
| Packaging Details | Bundle, bulk in container or as your demand. |
| Payment Terms | L/C,T/T |
Brand Name:TSONE
Application:Roofing and construction
Type:Steel Coil, Color Coated Steel Sheet
Standard:AiSi
Width:600-1250mm
Length:Requirement
Grade:CGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D
Tolerance:±1%
Processing Service:Bending, Welding, Decoiling, Cutting, Punching
Alloy Or Not:Non-Alloy
Delivery Time:within 7 days, 21 Days
Thickness:0.12mm-3.0mm
Technology:hot dipped
MOQ:5Tons
Delivery time:15-20 Days
Surface:Galvanized Coated
Coil ID::508/610mm
Technique:Cold Rolled
Surface Treatment:Coated
Specification
| Contents | PREPAINTED GALVANIZED – PPGI | PREPAINTED GALVALUME – PPGL |
| Base metal | GALVANIZED | GALVALUME / ALUZINC |
| Standard | JIS G 3312-CGCC, CGC340-570, (G550),ASTM A -755M CS-B, SS255-SS550 | JIS G 3312-CGLCC, CGLC340-570, (G550), ASTM A -755M CS-B, SS255-SS550 |
| Grade | Q195 Q235 Q345 | Q195 Q235 Q345 |
| SGCC SGCH SGC340 SGC400 SGC440 SGC490 SGC570 | SGCC SGCH SGC340 SGC400 SGC440 SGC490 SGC570 | |
| DX51D DX52D DX53D DX54D DX55D DX56D DX57D | DX51D DX52D DX53D DX54D DX55D DX56D DX57D | |
| S220GD S250GD S280GD S320GD S350GD S400GD S500GD S550GD | S220GD S250GD S280GD S320GD S350GD S400GD S500GD S550GD | |
| SS230 SS250 SS275 | SS230 SS250 SS275 | |
| Width | 600mm to 1500mm or as your requirement | 600mm to 1500mm or as your requirement |
| Thickness | 0.125mm to 4.0mm or as your requirement | 0.125mm to 4.0mm or as your requirement |
| Zinc coating | Z 30—275 (g/m2) | AZ 40—150 (g/m2) |
| Color | Ral Color Systerm or as per buyer’s color sample | Ral Color Systerm or as per buyer’s color sample |
| Substrate | Soft, Medium, Hard | Soft, Medium, Hard |
| Surface Finishes | Glossy and Matte | Glossy and Matte |
| Coil weight | 3 tons to 8 tons | 3 tons to 8 tons |
| Coil ID | 508mm /610mm | 508mm /610mm |
One: Waterproof paper. Waterproof paper is wrapped in the surface of a ppgi roll. Its main function is to prevent ppgi volume moisture, and avoid water vapor into the volume, then influence of hot dip ppgi coil surface. Such as zinc oxide layer when water vapor, can appear on the zinc spend turned white, affect beauty and using. This layer is necessary for the waterproof.
Two: ppgi steel layer. It’s out of waterproof paper. During the transportation progress, it’s very easy to hit. This layer is to prevent the scratch on the surface.
Three: Edge Protection layer. It is on the both sides of the roll, and made of iron. It’s mainly to protect the edge of ppgi roll. It’s very important, if the edge of ppgi steel coil wasn’t protected, might affect the deep processing, and even damage the machine.
Four: Straps. It is used to fix the waterproof paper and ppgi iron packaging, avoid the iron fall off. For ppgi roll with the width of 1000mm to 1500mm, it should be 8 straps and transverse 4 pieces, vertical 4 pieces. It’s the best way to tighten the rolls.
Five: Tags/Marks. Mill tags will be stick on every coils outside the packages. Including: name of commodity, grade, gross weight, net weight, roll number, and information of the mill, supplier information, etc. It’s will be helpful for clients to find the right rolls against the packing list.
With better protection reinforcement mode,and 100% meet the shipping requirements,100% protect the cargo from being damaged by violent shake. With fast delivery and always serve your heart and soul.
Q: Are you factory or trading company?
A: We are manufacturer and trader, sincerely welcome you visit our factory.
Q: Why choose us?
A: Our company have been in steel business for more than ten years, we are internationally experienced, professional, and we can provide variety of steel products with high quality to our clients
Q: Can provide OEM/ODM service?
A: Yes. Please feel free to contact us for more details discuss.
Q: How is your Payment Term?
A:One is 30% deposit by TT before production and 70% balance against copy of B/L; the other is Irrevocable L/C 100% at sight.
Q: Can we visit your factory?
A: Warmly welcome. Once we have your schedule, we will arrange the professional sales team to follow up your case.
Q: Can you provide sample?
A: Yes, for regular sizes sample is free but buyer need to pay freight cost.
