page_banner

product

  • ABS Bedside Three-crank nursing bed (Mid-range II)

    ABS Bedside Three-crank nursing bed (Mid-range II)

    Specification: 2130 * 960 * 500-720 – mm

    First of all, 3 crank hospital bed is a manual bed, it is operated by the crank to drive the movement of the bed to get various positions for patient’s comfort or clinical need.

    The head of the bed is made of ABS medical plastic injection molding, beautiful appearance, reliable and durable

    The surface of the bed is made of cold rolled steel plate, which is easy to clean

    Aluminum alloy guardrail (with anti-hand clamping function)

    Function: back adjustment 0-75° ±5° leg adjustment 0-45°±5° overall lifting 500-720mm

    The wheels use direct 125 luxury silent brake wheels

    ABS damped folding table is adopted to save space and facilitate use

  • High Quality ABS Bedside Medical Flat Bed

    High Quality ABS Bedside Medical Flat Bed

    Specification: 2130 * 900 * 500 mm

    Wholly molded cold steel sleeping platform, bed frame made of steel tube, Pre-treated and epoxy powder coated

    Head and foot frame made of epoxy powder-coated steel tube

    Four Ф125mm castors, with two brakes

  • ABS Bedside Double-crank  bed -I

    ABS Bedside Double-crank bed -I

    Specification: 2130 * 960 * 500 mm

    Crank manual hospital bed function

    The manual crank hospital bed is a flower bed offers the backrest and knee lifting and down adjustment. It is easy to process how to operate a hospital bed 2 crank, as there are two manual handles below in the hospital foot board for the followings’ adjustment function.

    Backrest lifting

    knee-rest lifting

    The head of the bed is made of ABS medical plastic injection molding, beautiful appearance, reliable and durable

    The surface of the bed is made of cold rolled steel plate, which is easy to clean

    Aluminum alloy guardrail (with anti-hand clamping function)

  • Bedside Double-crank nursing bed

    Bedside Double-crank nursing bed

    Specification: 2130 * 1020 * 500 mm

    This 2 cranks manual hospital bed is a manual crank system, offering function of back and knee up & down. More over the manual crank hospital bed is independent castor locking system. Once the nurse steps on the any of castor braking panel, the whole medical patient bed will be motionless.

    As it is a type of cheap medical bed compared to full electric hospital bed, it can be application of medical patient bed for home use on purpose of saving finance budget.

    The head of the bed is made of ABS medical plastic injection molding, beautiful appearance, reliable and durable

    The surface of the bed is made of cold rolled steel plate, which is easy to clean

    ABS double side rails are used for guardrail (with air spring control system)

    Wheel adopts 125 luxury silent wheel (equipped with central brake system)

  • Hot sell Bedside single-crank bed-I

    Hot sell Bedside single-crank bed-I

    Specification:2130 * 960 * 500 mm

    The head of the bed is made of ABS medical plastic injection molding, beautiful appearance, reliable and durable

    The bed surface is made of strip cold-rolled steel plate bending and pressing, beautiful and easy to clean

    Aluminum alloy guardrail (with anti-hand clamping function)

    Function: back adjustment 0-75°±5°

    Wheels with 125 luxury silent brake wheels

  • ABS Bedside Three-crank nursing bed (High grade I)

    ABS Bedside Three-crank nursing bed (High grade I)

    Specification: 2130 * 1020 * 500-720 – mm

    Three crank hospital bed needs additional one manual crank mechanism rotary axis to realize the function of integral height up & down. Three crank hospital bed is also the most used hospital bed tender purchasing list. While 3 crank prices of hospital beds, purchasing fees will be obvious higher than 2 crank hospital bed. Especially, you make a tender from a branded hospital bed manufacturers.However, the third crank can also be designed to operate the bed trendelenburg or reverse trendelenburg instead of height adjustment.

  • ABS Bedside Three-crank nursing bed (common type)

    ABS Bedside Three-crank nursing bed (common type)

    Specification: 2130 * 920 * 500-720 – mm

    There are 3 cranks installed under frame near the bed foot panel, the articulated bed surface will move to have fowler or semi fowler positions by rotating the crank.

    Normally, one crank is to move the back section from 0~75 degree, second crank is to move the foot section from 0~40 degree, while the third crank is to drive the height of the bed to different heights.

    The wheels use 125 luxury silent brake wheels

    Aluminum alloy guardrail (with anti-hand clamping function)

  • ABS Bedside orthopedic traction bed

    ABS Bedside orthopedic traction bed

    ABS Bedside orthopedic traction bed :

    Specification: 2130 * 900 * 2100 mm

    stainless steel head orthopedic traction bed :

    Specification: 2130 * 900 * 2100 mm

  • Stainless steel bedside single-crank bed from China

    Stainless steel bedside single-crank bed from China

    Specification: 2130 * 900 * 500 mm

    Simple structure, smooth surface, durable.

    Safe Working Load: 180kg

    Lighted weighted,easy to move and high cost performance.

    Aluminum alloy guardrail (with anti-hand clamping function)

  • Anti-baterial stainless steel massage table

    Anti-baterial stainless steel massage table

    Specification: 1900 x600x650mm

    Flame retardant, yellow resistance mildew resistance, bending resistance, 100,000 times wear resistance.Process epoxy painting, ASTM testing anti-baterial, paint thickness 0.12mm, brightness 60°, paint can resist 50kg impact

    With pillow

    Suitable for beauty salon, massage, tattoo, spa, dentist clinic, health therapy
    a comfortable and warm tactile enjoyment for massage and health.

    It can integrate beauty, massage and massage therapy.

    The bed is full and strong, the appearance design is simple, calm and generous. Bring you Reinforced welding, fine workmanship, strong and durable.

    Tube wall: Reinforce the thicker tube wall to make the massage bed more stable.

    Mattress: thicker mattress, high-density rebound sponge, will not collapse or deform.

  • ABS bedside table with thick panel

    ABS bedside table with thick panel

    ABS bedside table with thick panel :

    Specification: 470 x480x750mm

    stainless steel nightstand grey color :

    Specification: 460 x400x750mm

  • Luxury ICU Medical Equipment Five Functions Electric Adjustable Hospital Beds, Wholesale Hospital Multifunctional Nursing Bed

    Luxury ICU Medical Equipment Five Functions Electric Adjustable Hospital Beds, Wholesale Hospital Multifunctional Nursing Bed

    Luxury ICU Medical Equipment Five Functions Electric Adjustable Hospital Beds, Wholesale Hospital Multifunctional Nursing Bed

    6

    Head & feet washing:Paralyzed patients can be washed head and feet on bed.
    Infusion Function:Equipped with infusion pole.
    Dining Function:Equipped with on bed dining table.

    Home Nursing Hospital Bed
    Size:2080*960*540mm
    Gross Weight: 92KG, Net Weight: 85.8KG
    Load Capacity:≤250kg
    Backrest Lifting:0~75°
    Leg Up & Down:-55~55°
    Left & Right Turning:0~55°

12 Next > >> Page 1 / 2