News

The aging of color steel coils is mainly caused by coating loss, substrate corrosion, and environmental erosion. To effectively delay its aging process, it is necessary to form a closed-loop protection system from the entire process of material selection, installation, use and maintenance, taking into account source control and daily maintenance. Specific measures can be taken from the following aspects:

Material selection is the basis for preventing color steel coil from aging, which directly determines its upper limit of aging resistance. In terms of coating selection, high-quality environmentally friendly coatings such as PVDF (polyvinylidene fluoride) coatings are preferred, which have strong weather resistance and UV resistance, and can resist coating fading and powdering caused by exposure to sunlight and rain; Secondly, HDP (high weather resistant polyester) coating can be chosen, which has a higher cost-effectiveness and is suitable for ordinary outdoor environments. In terms of substrate, hot-dip galvanized or aluminum zinc alloy substrate should be selected, and the thickness of the zinc layer should comply with industry standards. By sacrificing the principle of anodic protection, the substrate can avoid direct contact with air and moisture and rust, fundamentally extending its service life. At the same time, during procurement, it is necessary to check the product testing report to ensure that the coating adhesion, salt spray resistance and other indicators meet the standards, in order to avoid premature aging of inferior products.

Scientific installation is the key to avoiding early aging of color steel coils, with the core being to reduce direct erosion from environmental factors. Clean the construction site before installation to avoid scratching the coating with sharp debris; During the installation process, it is necessary to ensure that the overlap between the color steel coils is reasonable, reserve sufficient drainage gaps, and prevent rainwater from accumulating and forming a humid environment. Especially when installing on roofs and walls, it is necessary to do a good job of sealing the internal and external corners, and use weather resistant sealant to avoid rainwater infiltration and substrate corrosion. In addition, installation tools should avoid direct friction with the surface of the color steel coil. If necessary, protective pads should be laid to prevent coating damage. At the same time, construction should be avoided in high temperature and high humidity weather to reduce the bonding hazard between the coating and the substrate.

Environmental isolation and protection in daily use can significantly reduce the aging rate. Color steel coils should be avoided from long-term exposure to harsh environments, such as chemical areas, beaches, and other areas with high acid and alkali concentrations and heavy salt spray. Additional protective layers or regular anti-corrosion treatments should be added; Color steel coils used outdoors can be paired with sunshades and rainproof facilities to reduce direct ultraviolet radiation and rainwater erosion. For the stored color steel coils, they should be placed in a dry and ventilated warehouse, away from moisture, oil stains, acid and alkali substances. When stacking, the bottom should be supported with brackets to avoid direct contact with the ground. At the same time, they should be covered with waterproof cloth to prevent moisture and rust.

Regular maintenance is an important guarantee for delaying the aging of color steel coils, and it is necessary to establish regular management. Regularly clean the surface of the color steel coil in daily life, use a soft cloth or high-pressure water gun to remove dust, oil stains, bird droppings and other debris, and avoid long-term adhesion and corrosion of the coating by pollutants; A comprehensive inspection is conducted before and after the rainy season every year, focusing on checking whether the coating is damaged or peeled off, whether the substrate has rust spots, and promptly handling any problems found. For small-scale coating damage, it can be polished and rust removed before applying special color steel paint. For large-scale damage, the damaged parts need to be replaced in a timely manner to prevent corrosion from spreading. In addition, avoid drilling and welding on the surface of the color steel coil at will. If construction is required, protective measures should be taken in advance, and paint and seal should be applied promptly after construction to avoid damaging the protective structure.

In short, to prevent the aging of color steel coils, it is necessary to take preventive measures. By using high-quality materials to build a solid foundation, scientifically installing to reduce hidden dangers, isolating the environment to reduce erosion, timely repairing daily maintenance, and multi-dimensional collaborative protection, we can maximize the service life of color steel coils and avoid safety hazards and economic losses caused by aging.